Each project is individual. Different needs for planning, architecture, arrangement of the site, equipment. Each client we provide an individual approach to design, calculation of the cost of construction.
Examples of houses – planning, architecture, cost – are indicative, and will be changed during negotiations and design, depending on the requirements of the customer. However, there is a solution that corresponds to the proposed planning, architecture, decoration, cost.
The price includes: house frame, windows, exterior decoration, interior decoration, internal engineering networks, lighting, built-in furniture, kitchen.
The cost does not include: unbuilt furniture, fireplace, curtains, household appliances, terrace, pergolas, canopies, foundation, external communications, landscaping, delivery and installation.
Modular house 71,5 M2
Modular house with flat roof 71,5 m2
House with two bedrooms, large living room – kitchen (studio). Comfortable for a family for 3-4 people.
Explication of premises
| Hallway | 7,9 m2 |
| Wardrobe | 3,1 m2 |
| Bedroom 1 | 11,2 m2 |
| Bedroom 2 | 11,2 m2 |
| Bathroom | 3,7 m2 |
| Living room – kitchen (studio) | 34,4 m2 |
| Total area of the house | 71,5 m2 |
Modular house 83,5 M2 Skandi
Modular house with pitched roof 83,5 m2
Barnhouse-style SKANDI House
House with two bedrooms, large living room – kitchen (studio). Comfortable for a family for 3-4 people.
Explication of premises
| Tambour | 4,44 m2 |
| Living room | 35,13 m2 |
| Bedroom 1 | 12,83 m2 |
| Bedroom 2 | 10,81 m2 |
| Bathroom 1 | 5,25 m2 |
| Bathroom 2 | 1,29 m2 |
| Tech. Room | 3,6 m2 |
| Kitchen | 10,12 m2 |
| Total area of the house | 83,47 m2 |
The house is designed for low heat loss in accordance with the requirements of KfW Effizienzhaus 55. The frame of the house meets the requirements of KfW Effizienzhaus 40 Plus. The price includes a terrace and a canopy over the terrace.
Modular Two-Storey house 113 M2
Modular two-storey house with a flat roof of 113 m2
House with three bedrooms, living room – kitchen (studio). Comfortable for a family for 3-4 people.
Explication of premises
| Ground floor | |
| Hall | 8,3 |
| Living room – kitchen (studio) | 28,3 |
| Bathroom | 5,7 |
| Wardrobe | 2,8 |
| Utility room | 7,0 |
| Second floor | |
| Bedroom 1 | 9,9 |
| Bedroom 2 | 13,8 |
| Bedroom 3 | 14,4 |
| Bathroom | 8,7 |
| Hall | 3,0 |
| Stairs | 11,1 |
| Total area of the house | 113,0 |
The house is designed for low heat loss in accordance with the requirements of KfW Effizienzhaus 55. The frame of the house meets the requirements of KfW Effizienzhaus 40 Plus.
Modular house 132,5 М2
Modular Two-Storey house 74,1 M2 Skandi
Modular house 186,2 M2
Modular house 25 – 50 M2 Skandi
Modular house 42,2 M2
Take a look at the portfolio
View completed modular homes.
Construction kits for frame-panel houses
Complete complete sets for the construction of frame-panel houses – wooden load-bearing frame, multilayer panels of external and internal walls, partitions, roofs, floors, floors, farms or coatings. The kits are supplied in accordance with the project agreed with the customer and in a complete set that meets the needs and requirements of the customer.
All elements of kits for frame-panel houses and modular houses are manufactured on the WEINMANN automated line.
All materials and raw materials in the production of sets of frame-panel houses are certified in the EU, WEINMANN technology (production line and production processes) is certified in the EU.
We use modular construction technology
We assemble in the workshop from the frame-panel sets made by us ready-made houses from one or more modules, in accordance with the customer's project or our own project. In the production of a kit for a modular house, the required strength of the frame is assumed, which will allow transporting ready-made modules without damaging the decoration, windows and engineering networks.
Houses are produced with varying degrees of readiness and configuration – from exterior decoration to a fully finished house with interior decoration, internal engineering networks, plumbing, lighting, climatic equipment, built-in furniture and appliances.
Ready-made houses are transported to the construction site, mounted on an arranged foundation and connected external communications.
Design and architecture
The architectural group develops its own projects of houses with an area of 25 m2 or more to multi-storey buildings of 5-10 thousand square meters. m2 . Dozens of various projects of buildings and structures, with flat and pitched roof, residential and commercial purposes have been developed. A series of Barnhouse-style SKANDI projects has been developed. Up to a third of our projects were built by us in Ukraine, including frame-panel houses using modular technology.
Architects prepare an architectural solution that includes the appearance and materials on the exterior and interior decoration, the selection of plumbing equipment, lighting, furniture. High-quality 3D modeling and visualization of photographic quality of architecture and interior of the house is performed.
Engineers and technologists
Engineers and technologists adapt customer projects for frame-panel construction and modular technology. We calculate the load-bearing frame and static loads, carry out the development and design of heating, air conditioning and ventilation systems, water supply and sewerage, electricity supply.
All design work is carried out using BIM technology. We use AutoCAD, ArchiCAD, Autodesk Revit and 3ds MAX, and other professional software, including to control the WEINMANN CNC automatic line.
Technology of modular counstruction
Using modular construction technology, we assemble a frame-panel house according to the modular structure in the workshop. We carry out installation of windows, internal and external doors, work on exterior decoration, roofing and drainage.
We lay engineering networks – electrical wiring, water supply, sewerage, climatic equipment. We perform interior decoration, install lighting and electrical fittings, plumbing equipment, mount built-in furniture, kitchen, household appliances.
On the customer's site we carry out work on the installation of external communications, the construction of the foundation in accordance with our project and calculations based on the relief and geology of the site.
Transportation of finished parts of the house – modules is carried out with the help of special low-frame vehicles.
Installation of the house is carried out with the help of a crane.
Modules are installed on the foundation, isolate connections, connect communications
Energy efficiency and environmental friendliness
Energy efficiency and environmental friendliness is ensured by frame-panel construction technology. The use of wood and wooden structures, high-efficiency multilayer sandwich panels, effective mineral and organic insulation and their combinations makes frame-panel houses energy efficient and environmentally friendly.
Improving energy efficiency is ensured through the use of windows with double-glazed windows of three or four layers, careful monitoring of the presence of cold bridges, other solutions for insulation of facades, wind protection, roof structures, sandwiches of coating panels and floors.
Technical and engineering solutions for improving energy efficiency include:
- use of ventilation with recuperation
- use of air or geothermal heat pumps for heating, air conditioning and hot water supply
- installation of solar collectors for heating water and solar panels.
We have experience in implementing such projects using energy-efficient engineering solutions.
CONSTRUCTION USING MODULAR TECHNOLOGY IS SPEED
Prefabrication is the preliminary manufacture of building structures in industrial production. Prefabricated structures are delivered to the construction site and used during the construction process. Of course, the prefactory was invented to build faster and more economically.
We produce prefabricated structures of varying degrees of readiness – from frame-panel wooden construction kits to finished modules, and then we prove the construction process at the construction site of the required condition – from installing the building frame and arranging the foundation to arranging the site.
As always, everything new is a well-forgotten old. Different levels of prefabrication of building structures have been used in construction for centuries. It is worth remembering even the production of reinforced concrete panels and the mass construction of "Khrushchev" on the territory of the Soviet Union. Prefabricated wooden houses are one-story America. So they built a hundred years ago, so they build there and now.
Prefabrication is the preliminary manufacture of building structures in industrial production. Prefabricated structures are delivered to the construction site and used during the construction process. Of course, the prefactory was invented to build faster and more economically.
We produce prefabricated structures of varying degrees of readiness – from frame-panel wooden construction kits to finished modules, and then we prove the construction process at the construction site of the required condition – from installing the building frame and arranging the foundation to arranging the site.
As always, everything new is a well-forgotten old. Different levels of prefabrication of building structures have been used in construction for centuries. It is worth remembering even the production of reinforced concrete panels and the mass construction of "Khrushchev" on the territory of the Soviet Union. Prefabricated wooden houses are one-story America. So they built a hundred years ago, so they build there and now.
Prefabrication and modular construction technology are primarily speed. The more stages of prefabrication, that is, the greater the level of readiness of the house achieved in production, the faster the construction will be completed.
Speed is a cost saving on the administration of construction. Administration is logistics, ensuring the presence of builders and equipment on the site, ensuring the construction process, constantly solving issues of "live construction". Administration is from 15% to 20% of the construction cost. Therefore, reducing the construction period several times from 18-24 months to 3-8 months, depending on the volume of construction, will reduce administrative costs significantly, and reduce the overall cost of construction by 7-10%.
The choice of the degree of localization of construction in production – whether it is construction kits, or ready-made modules with interior and exterior decoration and engineering – depends on many factors and must be economically and organizationally justified. These are the logistical accessibility of the site, the possibility and cost of organizing the construction process on the site, the ability to control the quality and control of the process, restrictions on the relief and entrances. It also depends on what kind of house needs to be built, what is its purpose and architecture.
Each case is individual. Modular construction technology is not always suitable and cost-effective. But a high degree of prefabrication is always savings and the ability to build faster and ultimately cheaper.